12V/24V Auto Solar Charger Controller with Light Time Control LCD Display PWM Dual USB Output Solar Cell Panel Charger Regulator
Feature:
1. Industrial grade main control chip is adopted.
2. Large screen LCD display; charge and discharge current display; cumulative power generation and discharge quantity query; temperature display light control + delay control; adjustable charge and discharge parameters; with power-off memory and other functions.
3. Double USB output. maximum current up to 25A. support iPhone charging.
4. Complete 3-stage charging management.
5. Built-in over-current. short-circuit protection. open-circuit protection. reverse protection. all self-restoring type. no damage to the controller.
6. Anti-backflow circuit. ultra-low calorific value.
Specification:
System voltage: 12V24V automatic adaptation
Rated charging current 10A / 20A / 30A (it can be purchased as needed)
Maximum photovoltaic voltage: 12V battery. up to 23V; 24V battery maximum 46V
Lift charging pressure: 14.4V
Floating voltage: 13.7V (default. adjustable)
Discharge cutout voltage: 10.7V (default. adjustable)
Discharge recovery voltage: 126V (default. adjustable)
Charging recovery: 13V
Light-controlled open light threshold photovoltaic plate: 8V (optical control light is delayed)
Light control switch light threshold photovoltaic plate: 8V (optical control turning light has delay)
USB output: 2-way USB output. 5V / 2.5A (maximum)
Stope current: <10mA
Material: ABS + PC
Size: 125x112x34mm/4.92x4.41x1.34in
Suggestion for safe use:
1. This controller is automatically identified by 12v/24v. When installing for the first time. please make sure that the battery has enough voltage so that the controller can identify it as the correct battery type.
2. Install the controller as close to the battery as possible to avoid the voltage drop caused by too long wire and affect the normal voltage judgment.
3. This controller is only suitable for all kinds of lead-acid batteries (including opening. sealing. colloid. etc.).
4. This controller can only use photovoltaic board as charging power supply. please do not use DC or other power supply as charging power supply.
5. The controller will heat up when it is running. Please pay attention to installing the controller on a flat and well-ventilated surface.
Note:
Due to the different monitor and light effect. the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 X Solar Controller
Feature:
1. Industrial grade main control chip is adopted.
2. Large screen LCD display; charge and discharge current display; cumulative power generation and discharge quantity query; temperature display light control + delay control; adjustable charge and discharge parameters; with power-off memory and other functions.
3. Double USB output. maximum current up to 25A. support iPhone charging.
4. Complete 3-stage charging management.
5. Built-in over-current. short-circuit protection. open-circuit protection. reverse protection. all self-restoring type. no damage to the controller.
6. Anti-backflow circuit. ultra-low calorific value.
Specification:
System voltage: 12V24V automatic adaptation
Rated charging current 10A / 20A / 30A (it can be purchased as needed)
Maximum photovoltaic voltage: 12V battery. up to 23V; 24V battery maximum 46V
Lift charging pressure: 14.4V
Floating voltage: 13.7V (default. adjustable)
Discharge cutout voltage: 10.7V (default. adjustable)
Discharge recovery voltage: 126V (default. adjustable)
Charging recovery: 13V
Light-controlled open light threshold photovoltaic plate: 8V (optical control light is delayed)
Light control switch light threshold photovoltaic plate: 8V (optical control turning light has delay)
USB output: 2-way USB output. 5V / 2.5A (maximum)
Stope current: <10mA
Material: ABS + PC
Size: 125x112x34mm/4.92x4.41x1.34in
Suggestion for safe use:
1. This controller is automatically identified by 12v/24v. When installing for the first time. please make sure that the battery has enough voltage so that the controller can identify it as the correct battery type.
2. Install the controller as close to the battery as possible to avoid the voltage drop caused by too long wire and affect the normal voltage judgment.
3. This controller is only suitable for all kinds of lead-acid batteries (including opening. sealing. colloid. etc.).
4. This controller can only use photovoltaic board as charging power supply. please do not use DC or other power supply as charging power supply.
5. The controller will heat up when it is running. Please pay attention to installing the controller on a flat and well-ventilated surface.
Note:
Due to the different monitor and light effect. the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 X Solar Controller
